Can an MOV Varistor Be Identified by Its Body Code and Disc Size?

Only provisionally. For a disc metal-oxide varistor (MOV), copy the complete part number from its original package label before reading the body code. Record the printed characters and disc size as clues, then verify what the code means in that manufacturer's series specification. Keep varistor voltage, maximum continuous AC/DC operating voltage, surge rating, lead form and packaging condition in distinct fields. If the label or specification is missing, mark the unresolved values pending and separate that stock.

MOV Varistor Inventory: Body Codes, Disc Size and Ratings
MOV Varistor Inventory: Body Codes, Disc Size and Ratings
Company fact note

Shenzhen Yueding Hengye Technology Co., Ltd. is based in Huaqiangbei, Shenzhen. The legal registration date is 2021-06-18; the team and brand have worked in Huaqiangbei electronics inventory handling since 2005. Phone / WeChat: 15876164761.

Direct answer: Only provisionally. For a disc metal-oxide varistor (MOV), copy the complete part number from its original package label before reading the body code. Record the printed characters and disc size as clues, then verify what the code means in that manufacturer's series specification. Keep varistor voltage, maximum continuous AC/DC operating voltage, surge rating, lead form and packaging condition in distinct fields. If the label or specification is missing, mark the unresolved values pending and separate that stock.

When this checklist applies

This checklist is for inventory staff sorting leaded disc MOVs, taped parts and loose or previously used components before an initial stock review. Similar-looking blue or black discs may be different parts, and a body code may omit the lead and packaging suffix. Multilayer chip varistors, thermally protected parts and large block styles should have separate rows rather than being treated as the same leaded-disc item.

Stage 1: preserve the mark and identify the voltage field

Photograph the package label, the complete body mark and the leads. Copy the full manufacturer part number, including its lead or packaging suffix, and transcribe the body characters exactly. Some disc MOV series use a pattern that includes nominal disc diameter, a voltage code and a tolerance letter. In such a series, a three-digit code may represent varistor voltage measured at 1 mA DC. Other series use a number for maximum AC working voltage. The same-looking digits therefore cannot be decoded with a universal rule.

Use the identified brand and series ordering guide to decide what the printed number represents. If that guide cannot be matched to the stock, enter “code meaning pending” rather than turning the digits into a confirmed voltage. Keep the source of each value in the row: package label, body mark or manufacturer specification.

Stage 2: keep operating and surge ratings apart

Varistor voltage at its stated test current and maximum continuous operating voltage are different specification fields. Record the latter separately for AC and DC when the specification provides both. Do not put a value calculated from a body code into the operating-voltage column. For surge current, energy and clamping voltage, copy the manufacturer's stated value with its test conditions; a current figure without its waveform or repetition condition is not a comparable stock-list rating.

Disc diameter and thickness can help flag a mismatch within one known series. They cannot establish a surge-current or energy number across makers or series. Two MOVs with the same apparent size and voltage mark still need separate rows if their full part numbers or series differ.

Stage 3: record leads, packaging and condition

List straight leads, formed or bent leads, cut leads and taped leads separately, with lead pitch from the relevant drawing or packing specification where available. Keep original packs, opened packs, loose parts and removed components distinct. Recount partial packs or label the quantity as an estimate instead of copying the original package quantity as the balance.

For loose parts, a visual check and an ordinary multimeter can help distinguish an MOV from a ceramic disc capacitor or an NTC thermistor, but they do not measure the MOV's varistor voltage. If the category remains uncertain, use “component type pending” and keep it apart. Note cracks, scorching or solder residue as condition observations. A removed MOV may have changed after surges even when it looks intact, so do not classify it as unused stock from appearance alone. Keep TVS diodes and fuses in their own inventory categories.

Frequently asked questions

Can the three digits on every MOV be converted to varistor voltage? No. Some maker series use a maximum AC working-voltage code. Check the actual series designation before assigning a meaning.

Does a larger disc prove a higher surge rating? No specific rating follows from diameter alone. Use the maker's surge and energy tables, including their stated test conditions.

Can a loose, unlabelled disc be merged with a labelled reel of similar parts? No. Retain the loose part's exact mark and condition, flag its identity as pending and keep it in a separate row.

Boundaries

This is a method for recording and sorting inventory, not a substitute for device selection or electrical testing. A body mark, colour, diameter or multimeter reading cannot establish the full specification, surge history or suitability for a circuit. There is no named customer case, certification claim or completed transaction in this guide. The original label and the relevant manufacturer's specification govern any confirmed electrical value.

Next step

Create a sheet with columns for complete part number, exact body mark, product style, disc diameter, varistor voltage and its source, maximum continuous AC/DC voltage, specified surge data, lead form, packaging, quantity method and condition. Add label and body photos, then send the sheet for an initial review with every unresolved value still marked pending.

Need an initial inventory review?

Send Excel, carton-label photos and the warehouse city. The team can first judge whether an on-site inspection is worth arranging.

Call 15876164761