Dongguan Hengli Factory Electronics Inventory Recovery

Direct answer: For electronic stock from Hengli automation-equipment projects, prepare a versioned inventory sheet for each project. Subtract warranty-service reserves and leave customer-owned material out until the customer confirms disposal. Record completed PLC, servo and other modules separately from loose electronic components. Send the lists and label photos for a remote first review. An indicative range is not a fixed price; any visit depends on clear authority, suitable scale, site access, loading arrangements and an agreed time window.

When this process applies

This guide is for surplus electronic stock at Hengli mould and machinery factories, non-standard automation-equipment makers and small stores with many different parts. It covers equipment-control spares, project leftovers and mixed stocks containing PLC and expansion modules, servo drives or motors, HMI panels, sensors, power supplies, and loose MCUs, driver ICs, passives or connectors. List mechanical tooling and whole machines outside this electronics scope.

The examples below explain a sorting method. They are general practice only, not a named client transaction or completed result.

Stage 1: establish project scope and authority

Give each automation project its own sheet under one inventory version. Record the project number, status, purchaser, warranty end date, stock quantity, service reserve and quantity available for disposal. Keep the reserve out of the current lot. If a contract or payment makes material the customer's property, hold those rows separately until the customer confirms disposal. A later summary can group matching models across projects while preserving every source project.

For machinery replacement spares, write the original equipment model next to the control-part model. Unused stock and parts removed from old equipment have different states and need different rows.

Stage 2: use separate sheets for modules and loose parts

For a completed module, record the full model, hardware or firmware version, nameplate serial number, condition and whether its accessories are complete. State whether it is sealed in its original box, opened but uninstalled, installed for testing, or removed from equipment. A tested or removed unit is assessed by its actual state, not as a sealed new unit. Keep servo drives and matching motors as a set only when the set is actually present.

For loose components, record the complete part number including suffix, brand, lot or date code, quantity and packaging. Photograph module nameplates and box labels, and reel or carton labels for components. A PLC carrying a user program remains the factory's responsibility to clear or mark; this review does not require reading or copying the program.

Stage 3: consolidate a many-SKU list and plan a count

  1. Normalize spelling and internal prefixes into a separate comparison key while retaining the original entry.
  2. Do not merge different part-number suffixes.
  3. Convert reels, tubes, trays or cartons to units, and modules to units or sets, while keeping the original pack unit.
  4. When the same part is summarized across projects or locations, retain its source project and storage-location detail; never merge different owners.
  5. Group very small miscellaneous quantities by category with representative photos, pending a physical count.

Use the resulting versioned list and photos for an initial remote review. Before a visit, confirm personnel and vehicle registration, a place to load heavy or boxed modules, the handling method, an agreed time window and who has disposal authority. A same-day visit can be coordinated only when these conditions and inventory scale fit; otherwise agree on another date.

Common questions

Why make a separate sheet for each automation project?

A project sheet keeps project status, warranty end date, reserved service quantity and available disposal quantity visible. A cross-project total can be added later while retaining each source project.

Can PLC and servo modules be listed with loose components?

Use separate sheets. Modules need model, hardware or firmware version, serial number, actual condition and accessories; loose components need full part number, lot or date code and packaging.

What if a customer has paid for project material?

Keep it outside the current disposal scope until ownership and the customer’s confirmation are clear. Warranty-service reserves also stay outside the available quantity.

Can a team visit Hengli on the same day?

A visit may be coordinated when the versioned list, authority, suitable inventory scale, vehicle access, loading arrangements and time window are confirmed. It is not an unconditional same-day promise.

Boundaries

A preliminary range does not lock a final total price; physical quantities, model versions and actual condition still need checking. Warranty reserves and customer-owned rows without confirmation are outside the current lot. Installed, tested or removed modules are not priced as sealed new units. The page does not promise acceptance of a whole machine or every item, nor an unconditional same-day visit. It describes general practice only (E0), with no named customer case or reported transaction result.

Next step

Send the versioned project sheets, warranty reserve and disposal-quantity fields, a separate module sheet and component sheet, and representative nameplate or label photos. State the warehouse location, selling entity, access requirements, loading position and available time window. For broader scope, see Dongguan factory electronics recovery or factory inventory handling. Call or message 15876164761 to start a preliminary review.

Company information

Shenzhen Yueding Hengye Technology Co., Ltd. is based in Huaqiangbei, Futian, Shenzhen. Its legal registration date is 2021-06-18; the team and brand have worked in Huaqiangbei electronics inventory handling since 2005. Corporate payment and invoices are available, subject to confirming the selling entity and transaction details.

Call 15876164761